Super-DancerElectronic Dancer Arm Position Controller |
 |
shown with optional stand | |
| No Potentiometer to wear out No Operator Adjustments Integrator for constant loop size Stand Mounted super dancer |
SUPER DANCER incorporates state of the art electronic circuitry
which eliminates the use of a typical potentiometer. Most dancer arm
applications use potentiometers which have a very short life span
and cause very expensive down time. By eliminating the potentiometer
there is virtually no physical wear and tear eliminating down time. SUPER DANCER state of the art electronic circuitry allows easy adjustments of your loops zero to full speed set points. There is no need for repositioning the potentiometer to allow for a different loop height or changing dancer arm gears for a different RPM /inch speed range. These adjustments may be made while equipment is still in operation which eliminates even more costly down time! SUPER DANCER state of the art electronic circuitry incorporates PID output functions as a standard feature. The PID feature automatically integrates to achieve minimum loop height changes and is a must for fast changing line speeds such as Roll Forming applications and high speed feeding applications! SUPER DANCER can be applied in straightener, rewind or unwind applications, etc.. and supplies an isolated analog dc voltage to control virtually any DC or AC drive control. |
Now available in Shaft version to adapt to your existing
dancer linkage |
|
Basic unit is an open chassis type with the analog prox included. |
Add enclosure, arm, stand, and limit if required. Add other options for special systems. (consult factory) |
||
 |
|||
| SuperDancer | |||
| basic assy | PSDAA10005 | Superdancer open chassie |
 high performance PID loop control with adjustable zero, gain, and intergal control for smooth operation Analog output signal is isolated from ground Optional contact closure for tight or full loop indication |
| PSDAA10010 | Parts for Drive option | select this instead of the open
chassie if you will order a drive |
|
| enclosure | PSDAA10003 | 12x10x5 superdancer only | |
| PSENC10032-SD | 16x14x6 fits dc drives | ||
| PSENC10032-SDAC | 16x14x10 fits ac vector drive | ||
| arm option | PSDAA10000 | Dancer arm assembly |
 Rugged arm with non marking delrin roller and adjustable counter ballence weight weight can be moved to roller side to add more load to arm in situations where required can be rotated 360 deg with no mechanical failure no pot to wear out heavy duty ball bearings and shaft will never wear out or break off 1 inch thick steel mounting plate with predrilled holes for mounting Other arms available with wider rollers and diffrent materials |
| Stand | PFSTD40000 | Superdancer stand |
 |
| limits | PSDAA10006 | upper or lower electronic limit switch |
 Optional
contact closure for tight or full loop indication |
| drive options | PSDRV10001-SD | 1/8-1hp 120v regen |
 |
| PSDRV10002-SD | 1/4-2hp 220 v regen dc | ||
| PSDRV10012-SD | 1hp 220v flux vector | ||
Cables for Rapid Air reels and straighteners |
|||
| WESTARAAC1 | old style rapidair cable |
 |
|
| WESTARAAC2 | 6 pin rapidair
cable also fits waddington pull rolls. |
 |
|
| WESTARAAC3 | 25 pin rapidair cable w jog | ||
 |
|||
| Other Available Options | |||
| STWESTAV/F1 | voltage to frequency output | ||
| WESTAMUX2 | analog multiplier | ||
| WESTAHVAO1 | 0-90v dc output | ||
| WESTAJOG | jog option | ||
| WESTALFO1 | AC line filter | ||
| WESTATW1 | limit thumbwheel setpoint | ||
| WESTARP1 | remote distance pot | ||
| WESTARP2 | remote gain pot | ||
| WESTAPT1 | payoff/takeup switch | ||
| WESTAFR1 | forward reverse switch | ||
| WESTAMAO20 | 4-20 ma output | ||
| WESTAMAO10 | 0-10 ma output | ||
| WESTADIV2 | analog divider | ||
| WESTABSO1 | base speed option | ||
| WESTAAOM1 | anolog meter | ||
| WESTAEAO1 | extra analog output | ||
| WESTAEAON1 | extra analog output inv | ||
| WESTATOGGLE | on off toggle switch | ||
| WESTASUM3 | line speed summing | ||
| WESTAONOFF | two setpoint on off control |